Making Your Own Replacement Key For Saab 93 Viggen
Saab owners who lose their keys may worry about the cost and inconvenience of replacing it. There is a way to avoid these expenses by making your own key fob.
You will need a flathead phillips screwdriver to do this. Place the flathead screwdriver into the slot located at the middle of the case, and slowly open it.
Cost
Most SAABs have two keys when they're new, but some used vehicles only have one. In this instance, the owner must get a new key, and this could be costly. There are a lot of ways to save money during this process. If you're only looking to replace the key fob case and not the emergency key or badge You can save money by buying a used case from a dealership. These cases do not have the emergency badge or key, and are prone to wear out quickly.
You also have to pay for installation and programming the TWICE module. These costs can quickly add up especially if there's no spare key.
For this reason, it is essential to have at least two keys to your car. This way, if lose the only working key you won't be left with no transportation.
It's not as hard as it may seem to add a second Saab 9-3 key. The only problem with this is that the key has to be connected to the car's computer. This can be accomplished by an auto dealer, however it could take a while to make an appointment. You can find all the information you need on the internet to help you through the procedure.
Installation
Most Saab cars built since 1995 have an immobilizer system that utilizes a key-fob for controlling the car's engine. This system also controls the remote and door locks for the vehicle. It is vital to have a spare key to ensure that you don't lose the original and causing your car to be stolen. If you lose the only Saab working key, there are numerous ways to replace it without spending a fortune on dealer services.
You must first prepare the new keyfob. To do this, you will need a flathead screwdriver to open the case. Put the screwdriver into the small slot in the center of the case, and gently move the screwdriver. If you're having trouble, try using different angles. Once you've opened up the case, you can remove the electronics and place them into a brand new fob case.
You can begin the process of programming when you have the replacement key and fob. It is necessary to connect your Tech2 and then follow the steps for NG 9-3 either with or without the transponder. It is recommended to replace the unit that is connected to the correct key and transponder. You can locate this unit on the internet. However, you should be sure that it's an OEM replacement.
Programming
In general, adding an additional key for Saab 9-3 requires an instrument called a Tech 2. It also involves programming the car to recognize the new key. This is a much more complex process than simply copying a key made of metal. It should be handled by professionals to avoid damaging the electronic system of the vehicle. If you're considering acquiring the spare key to your car, you should try to do it as quickly as possible. If you put off, it could cost an additional amount in the future.
In addition to putting in the replacement key, you'll also need to replace the CIM or TWICE module. This is typically a mail-order process and isn't something that you can do with an aftermarket supplier. The cost of purchasing a new automobile can be expensive, based on the car's model.
There's a way to avoid the dealer charging you top dollar to replace your vehicle's computer. S.A. Locksmith & Security can RE-Program the EEPROM in your Saab computer and prepare the vehicle for the new key, thereby saving you the cost of a brand new car computer! This service is fast and inexpensive, and it is simple. It will save you up to 50% or more when compared to what a dealership will charge you! This is a great option for those who have lost their keys.
Remotes
saab replacement keys uk G28 Car Keys -3 Viggen was among the most distinctive vehicles to ever wear the Saab badge. It was an Scandinavian front-drive fighter jet-inspired beast that was both fast and enjoyable to drive. There were many other Saab models followed, but none were as unique.
If you own a Saab 9-3 and lose your key fob, it's important to replace it as fast as you can. Contrary to the more popular European hot hatchbacks, Saab vehicles come with an immobilizer system that requires a unique key to begin. The replacement process is fairly simple if you have an extra key, but it could be expensive and long-winded if you don't own an extra.
You can save money by purchasing a second-hand replacement key fob and getting it programed by a locksmith near you. However, you should be cautious about buying used keys on eBay and other online outlets. They may not be authentic and you could pay more at the end.
Anyone can remove the electronic components and battery of an old key fob with a small flathead phillips screwdriver. Be careful not to harm the tiny electronic components inside the case. It is also recommended to be careful not to pour liquids onto the inside of the case, because it could cause damage. Also, avoid buying cloned keys from aftermarket sellers, as they may not have been paired with the CIM on your car.